Portable Units

The portable impregnator unit is designed to process woven roving, stitch mat and/or fiberglass cloth with catalyzed resin, metering the resin-to-glass ratio and depositing this material on a flat surface (either male or female mold style).

Description

The portable impregnator unit is designed to process woven roving, stitch mat and/or fiberglass cloth with catalyzed resin, metering the resin-to-glass ratio and depositing this material on a flat surface (either male or female mold style).

The unit is provided on rollers to allow its movement within a facility and be used on multiple stationary molds.

Additional information

Output Capabilities:

Approx. 1000 lbs. (454 kg) per hour; 20 ft. (6.1 m) per minute

Fiberglass Fabric Widths:

18 in. to 60 in. (45.7 cm to 1.5 m)

Air Requirements:

100 CFM (2.8 m3) per minute @ 100 psi (7kg/cm2)

Electrical Requirements (with optional heater):

220 Volt, single phase, 30 amps, 60 cycle 220 Volt, three phase, 30 amps, 60 cycle

Catalyst Ratio:

0.75% to 3%

Pumping System:

Standard 11:1 Resin Pump

Video

Documents

Brochures:
Impregnator