Materials Monitors

If you are looking for a simple way to improve your bottom line, then integrate an MVP Materials Monitor into your process today.

Category:

Description

Monitoring your production rate and materials usage rate is crucial to your profit margin. If you don’t know your cost per part, you can’t control your profit.

The CB-6000 Materials Monitor is easily adjusted for your materials by entering fiberglass yield (metric or pounds), and resin specific gravity. The built-in microprocessor will compute the proper formula to convert input information into numeric output.

The CB-8000 Materials Monitor features an easy to read display, can display in pounds or gallons, the display can be reset remotely, includes a magnetic pickup attached to the fluid section of the pumping system, and the display is protected by a glass/polycarbonate sheet allowing for high visability.

Additional information

CB-6000

Magnum Venus Products offers a series of digital electronic Materials Monitoring Systems which may be interfaced with any of the MVP pumping systems to indicate resin flow, chopper glass rate and gelcoat flow.

This information may be read as a rate/minute in pounds or kilograms, and may also read as a total per part. A simple comparison of glass and resin will reveal critical glass-to-resin content and allow fine tuning of your system to exact specifications.

CB-8000

– Panel meter enclosure will be 20” wide x 16” tall x approximately 6” deep. UL listed, Blue color, fully labeled.
– Scaling of the displays can be done in either pounds or gallons and decimal precision can be adjusted. User preference.
– Panel will have 1 exterior button for Display 2 reset, 1 remote button for Display #1 reset, and an on/off switch.
– Displays will be protected by glass/polycarbonate sheet with high visibility
– Counting will be tracked using a 5 count for APS pumps (a 4 count for UPS) magnetic pickup attached to the fluid section of the pumping system that will be cabled back to the main unit.

Display #1 Exterior

– Consists of 2.25” tall x 12.00” wide, red LED on black background, displaying 6 segments. This will allow you to track shot sizes up to 9999.99, 99999.9 or 999999 units
– This display will have a remote reset (length to TBD) so the operator can reset the counter from the area that he is working in.
– This display was envisioned as the working meter so the operator could specifically target parts of the tank for certain weights.

Display #2 Exterior

– Consists of 2.25” tall x 12.00” wide, red LED on black background, displaying 6 segments. This will allow you to track shot sizes up to 9999.99, 99999.9 or 999999 units
– This display will have a switch on the box that will allow the meter to be reset from the panel only.
– This display was envisioned as the overall tracking meter to keep track of the entire part.

Display #3 Interior

– Consists of .5” tall x 4” wide (approx.), red or green LED on black background, displaying 8 segments. This will allow you to totalize up to 99,999,999 units
– This display will have a reset button inside the enclosure so that only authorized personnel have access.
– This display was envisioned as an inventory meter that could be reset at certain time intervals by certain people.

Options

  • Resin Totalizer (CB-6000-RT)
  • Glass Totalizer (CB-6000-GT)
  • Resin/Glass Totalizer (CB-6000-RGT)